Bongofish

Screen Tablet malarky => Monitors => Topic started by: Pantaryl on February 06, 2008, 02:33:43 PM



Title: Broken ZIF
Post by: Pantaryl on February 06, 2008, 02:33:43 PM
So I managed to break the ZIF on both of the FFC connectors on my inverter board.

Now I can't seem to get them (FFC) working again..

Any way to easily repair the ZIF?

My Inverter board is a SHARP DUNTK2960TP

Can't seem to find it anywhere (for possible swap).

Thanks.


Title: Re: Broken ZIF
Post by: Drewid on February 06, 2008, 09:35:53 PM
Hiya. Got a picture?

You can sometimes wedge the cablr in place by using a small wedge of plastic, scrap.  Cut a small fingernail sized piece of flat plastic and sand it down to a thin wedge.


Title: Re: Broken ZIF
Post by: Pantaryl on February 06, 2008, 10:30:13 PM
Can't believe I didn't think of that! Thanks!

I have the system at home. I'll take a picture then.

Thanks!


Title: Re: Broken ZIF
Post by: Chems on February 07, 2008, 12:47:16 AM
Hot glue it in place? Sellotape it in (thats what I did)