Bongofish
November 21, 2019, 05:09:02 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: You can attach photos hosted by the forum rather than using an external image hosting site, this means they will stay forever and not disappear after a year or two.
 
  Home Help Search Login Register  
  Show Posts
Pages: [1]
1  Screen Tablet malarky / Design issues / Rossmorr i23 HD on: February 17, 2012, 10:54:18 AM
http://www.engadget.com/2012/01/03/rossmorr-i23-hd-interactive-display-tablet-offers-up-high-new-ye/\


and http://www.rossmorr.com





http://youtu.be/4DZxTZmveHI
2  Screen Tablet malarky / Design issues / The hardest part about making a tablet is..... on: January 04, 2012, 11:59:55 AM
1. Jitter
2. LCDs are fragile
3. Cleanroom or bust
4. Paint
3  Screen Tablet malarky / The Trading post / Here is a website that shows a tablet i made on: January 02, 2012, 12:52:18 AM
www.rossmorr.com
4  Screen Tablet malarky / Build Logs / Re: Morgan Ross Egging's Interactive Display 3.0 on: December 30, 2011, 11:54:49 AM
dead zone. one inch. there is software that blocks off that part to make desktop navigation easier.

i think that LG is the only maker of a 23" IPS led panel. sold by different brands. this was asus.
5  Screen Tablet malarky / The Trading post / Here are some videos of some tablets i made on: December 30, 2011, 11:51:35 AM
http://www.youtube.com/watch?v=RbEUImvxyJs

http://www.youtube.com/watch?v=qPf8XK_4iFw

http://www.youtube.com/watch?v=4DZxTZmveHI
6  Screen Tablet malarky / Build Logs / Morgan Egging's 3rd DIY Cintiq. Finsihed. on: June 01, 2011, 02:11:03 AM
My third DIY Cintiq is almost completed. The fiberglass case is curing, should be back in action tomorrow.

Wacom Intous 3 9x12   USED $246
Acer S211HL bd 21.5-Inch Widescreen Ultra-Slim LED Display     NEW $138
Fellowes Office Suites Premium Flat Panel Monitor Arm (8033801) NEW(DISCONTINUED)$34

http://www.youtube.com/watch?v=7X4_bN3taxU








My first one trashed 7! LCD's...I learned the hard way, and now I know how to select components so that the DIY Cintiq comes together easily.

http://www.youtube.com/watch?v=RbEUImvxyJs

I think I may be the only one, but I do DIY Cintiqs differently than everyone else. I use a screen that is much larger than the tablet, so that only the area in the middle of the screen is active. I do this for several reasons and believe strongly that this is the way to go.

I have been building these for years and am available to help if any first timers have questions. Basicly, you are going to learn the hard way or the easy way. If you have any questions, morgan@morganegging.com

Thank you to the people who have posted here over the years. While I discovered how to make these on my own the hard way, you dont have to. Thanks to people like Bernard on this forum there is a ton of good info.
7  Screen Tablet malarky / Build Logs / Re: 15" DIY Cintiq Video *just finished* on: June 29, 2010, 04:33:59 AM
working on a new project. inquire pm.
8  Screen Tablet malarky / Monitors / Re: Should I, Shouldn't I? on: June 26, 2010, 08:06:48 PM
it would cost you 300 bucks to find a lcd lvds driver board for a laptop screen. a used 17" dell 1701fp is like 60 bucks.......
9  Screen Tablet malarky / Monitors / Re: My finished 15" DIY cintiq on: June 26, 2010, 08:05:39 PM
way ahead of you, I have benched these projects for one that is somewhat similer to kinet, but better
10  Screen Tablet malarky / Monitors / Re: My finished 15" DIY cintiq on: June 23, 2010, 08:50:17 PM
the multi-touch is a pre-assembled IR touch-panel from Hong Kong that I layed over a 24" lcd. the lcd happens to be 120 hz  (3d ready)
11  Screen Tablet malarky / Build Logs / 15" DIY Cintiq Video *just finished* on: June 23, 2010, 07:34:06 AM
http://www.morganegging.com


Many thanks to Bongofish users! and DIY projector sites as well.  sorry no build log. Here is a video of my *finished* product.

Thanks also to Wacom! as evil as your IP licensing policy is, your products are built like tanks and perform like Ferrari's

I have a stack of 7 broken LCD's in a closest now. a LCD is like a string of Christmas lights, one goes out and its done, expect you can't replace the broken light, and there  are 6 million of them, and the interconnects are weaker than a single sheet of paper, and surrounded by a lethal 2000 volts.

the link is a redirect to my video on youtube

thanks for your site bongofish, you are the bestest
12  Screen Tablet malarky / Monitors / Re: My finished 15" DIY cintiq on: June 23, 2010, 07:32:22 AM
Admin Op, please move this to the appropriate section, my bad
13  Screen Tablet malarky / Monitors / My finished 15" DIY cintiq on: June 23, 2010, 07:30:16 AM
http://www.morganegging.com


Many thanks to Bongofish users! and DIY projector sites as well. sorry no build log. Here is a video of my *finished* product.

Thanks also to Wacom! as evil as your IP licensing policy is, your products are built like tanks and perform like Ferrari's

I have a stack of 7 broken LCD's in a closest now. a LCD is like a string of Christmas lights, one goes out and its done, expect you can't replace the broken light, and there are 6 million of them, and the interconnects are weaker than a single sheet of paper, and surrounded by a lethal 2000 volts.

the link is a redirect to my video on youtube
14  Screen Tablet malarky / Monitors / good info on: June 23, 2010, 07:24:45 AM
the new acer 120hz 23.6 in has no side panel at all, so no ffc.....also the dell 2001fp has no side panel, but the acyrlic is 3 ccfls thick so too think. the dell 1701 fp is great, there are at least 2 models of insides, one with a longish ffc, and one with a short ffc,(no indication on outside of moniter) the long one will extend enough for a tablet. both dells use external power bricks!
Pages: [1]
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!