Bongofish
October 23, 2019, 10:03:51 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: You may have to login twice the first time,  but we don't know why - Erm I mean it's a security thing yeah that's it - security.
 
  Home Help Search Login Register  
  Show Posts
Pages: [1]
1  Screen Tablet malarky / Build Logs / Re: 21.5' Cintuos [WIP] on: November 16, 2011, 06:20:01 PM
I read that the pcb and shields need grounding, solder a wire back to the laptop, there are two metal arms on the sides of the lcd, depends on your laptop model.
2  Screen Tablet malarky / Design issues / Re: jittering pointer on: November 16, 2011, 05:41:12 AM
Smiley I thought because it is aluminium then it's ok but it is not (I am using cooking aluminium foil), and thanks for the double shield I will do it today, I think I need to make a plastic housing first and double wrap and ground them.
3  Screen Tablet malarky / Build Logs / Re: 21.5' Cintuos [WIP] on: November 16, 2011, 05:09:15 AM
I have a smaller screen too, intuos4 m with aspire one happy 10", I have to set the mapping area by guessing and testing the cursor, I did it horizontally first and then vertically (width then height) because of the jitter on the lower part of the screen about an inch wide across the screens lower part, and disable the force proportion. I have no further idea how to eliminate the jitter.
4  Screen Tablet malarky / Design issues / Re: jittering pointer on: November 15, 2011, 12:05:19 PM
Just made a scary mistake yesterday, wrapping the pcb with aluminium foil and the screen goes totally white, pull up the battery immediately, and it's working again Smiley. Wrapping the pcb with paper first and then the foil, I still have the jitter, a small improvement toward the lower part of the screen about 0.25 less jitter space measured from the lower edge.
5  Screen Tablet malarky / Design issues / Re: jittering pointer on: November 11, 2011, 04:18:45 PM
I have this jitter right now, everything is fine on the upper part of the screen no jitter at all, the jitter is about an inch from that long pcb on the lower part of the screen, will try to shield and ground it. aspire one happy and intuos4 m.
6  Screen Tablet malarky / Tutorials and useful knowledge / Re: Laptop LCD supplier + How to remove a laptop screen. on: November 06, 2011, 09:32:49 PM
Are there any guides on how to strip a laptop screen? The circuit board on the back is very delicate and i don't want to mess anything up...

I want to know this as well, I have tried to remove the metal frame, because the base (the white thickest part on the bottom) seems glued strongly on top and bottom side, the light only come form the bottom plus there is a brown flexible connector. I have this aspire one happy 11" on top of intuos4 medium.
Pages: [1]
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!