Bongofish
June 23, 2018, 01:07:28 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: You can attach photos hosted by the forum rather than using an external image hosting site, this means they will stay forever and not disappear after a year or two.
 
  Home Help Search Login Register  
  Show Posts
Pages: [1] 2
1  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: April 19, 2018, 12:03:46 AM
Open Arduino IDE, grab any example sketch (blinking one) and upload it to Your board.
If You cannot do that, You're doing it wrong or have broken board. Both problems cannot be resolved by me remotely.
If You have no problems with writing any example sketch, turn on "verbose mode" and upload it again. You'll able to copy whole command from ardiuno IDE console and run it from terminal window.

If that way works, then use hex file generated by WaxBee rather than one generated by Arduino compiler.

How do I use the hex file?
2  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: April 18, 2018, 03:23:06 AM
As I wrote. ProMicro comes with (ugly) bootloder. You can use that bootloader. You should:
- connect Pro Micro to USB port
- wait 10s
- grab spare wire and short two pads on the board: GND and RST. But it's not as simple. You should simulate button and do a double click within less than a second. That forces boart into bootloader mode.
- wait for drivers installation.
- find what COM port are assigned to Your board.
- on Windows open terminal and send command as acediac wrote on forum:
avrdude -v -patmega32u4 -cavr109 -P\\.\COM4 -b57600 -D -Uflash:w:gd-0405-r.hex:i
where "gd-0405-r.hex" is the name of the hex file and COM4 is Your COM port.
That should program Your board with generated firmware file.
btw, I need to place avrdude.exe, avrdude.conf and firmware.hex in same directory and enter that dir by the terminal.


Yes, You can use serial->USB converter and use old serial drivers. That works on Win XP or on Linux. I can help You with XP. For linux, please search on Your own (google doesn't hurt) or ask any Linux guy for help.

One problem; when I try the command it says "avrdude: error: buffered memory access not supported. Maybe it isn't
a butterfly/AVR109 but a AVR910 device?"

Here is info it gave me when I hit enter:
avrdude: Version 5.10, compiled on Jan 19 2010 at 10:45:23
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is "C:\WinAVR-20100110\bin\avrdude.conf"

         Using Port                    : \\.\COM9
         Using Programmer              : avr109
         avr910_devcode (avrdude.conf) : none
         Overriding Baud Rate          : 57600
         AVR Part                      : ATmega32U4
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PA0
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    10     8    0 no       1024    8      0  9000  9000 0x00 0x00
           flash         65     6   128    0 yes     32768  128    256  4500  4500 0x00 0x00
           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00

         Programmer Type : avr910
         Description     : Atmel AppNote AVR109 Boot Loader

Connecting to programmer: .
Found programmer: Id = "@ e"; type =
    Software Version = D. ; Hardware Version = ≡.∩
avrdude: error: buffered memory access not supported. Maybe it isn't
a butterfly/AVR109 but a AVR910 device?
3  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: April 18, 2018, 01:13:39 AM
Also if i have to use linux like pesho mentioned with serial to usb; i would happily do so.
4  Screen Tablet malarky / Build Logs / Re: Fujitsu T5010 - utilize screen from Tablet-PC on: April 16, 2018, 09:42:28 PM
Hello Ertew
I have purchased one of those pro micro clones for the purpose of making USB on my Wacom digitizer (SU-025-C02) and I would want to know if you know how to flash the pro micro with Waxbee. Could you tell me how to flash waxbee on the pro micro? Thank You!
5  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: April 16, 2018, 09:22:28 PM
OK my pro micro clone just arrived. Plugged it in and installed the Aurduino IDE drivers!
Now I just need to find out how to get waxbee on this!
6  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: April 15, 2018, 04:11:45 AM
Pesho I could also just have a separate power source right?

Also it is a pro micro clone but I think it will work. Like I said it has the same chip as the teensy.
7  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: April 12, 2018, 01:23:04 AM
Ok I found one of those clone teensys and it has the same atmel chip for about $7 on ebay.
8  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: April 10, 2018, 06:19:32 PM
Not sure if I want to buy a teensy. If I do how would I install the drivers?
9  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: April 08, 2018, 05:58:36 PM
Alright so the sympodium did not work so I am opening back up this thread. I have this usb sim card reader and have heard people can use it for serial to usb.
10  Screen Tablet malarky / Heyaaaalpppp / Anyone know how to get pressure sensitivity on a Sympodium ID-250 on: February 21, 2018, 02:35:59 AM
Just wana know
11  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: February 20, 2018, 03:20:12 AM
Is there pressure sensitivity?
12  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: February 14, 2018, 02:08:06 AM
I have also heard somewhere that I could use a sound card is that true? If so can someone tell me how?
13  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: February 13, 2018, 11:18:08 PM
I have found a small working motherboard with a serial port! I will try to get the correct voltage and make a serial cable to connect to it. I think I already know the pinout..
14  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: February 13, 2018, 08:09:57 PM
Pesho how about one of these? https://www.newegg.com/Product/Product.aspx?Item=9SIA6706X93506&cm_re=serial_to_usb-_-9SIA6706X93506-_-Product


I would just mod the cable a little so it could connect to the digitizer!

Also I think I want to try USB so what would the pinout be from the tc4400 to usb?

Thanks
15  Screen Tablet malarky / Heyaaaalpppp / Re: Need a schematic and pin out for a Wacom SU5E-12W32AS-01X on: February 13, 2018, 07:26:09 PM
So this would technically work? I do not mind using linux  Grin

Also I could work out something for the 3.3v
Pages: [1] 2
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!