Bongofish
September 16, 2019, 08:28:59 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: You may have to login twice the first time,  but we don't know why - Erm I mean it's a security thing yeah that's it - security.
 
  Home Help Search Login Register  
  Show Posts
Pages: [1] 2
1  Screen Tablet malarky / Monitors / Re: Bad Monitors on: August 30, 2007, 02:08:34 PM
This is a bad monitor: Fujitsu Siemens 15" 38B2-M  Angry very baaaaaaaaaaad
2  Screen Tablet malarky / Design issues / Re: jittering pointer on: August 30, 2007, 09:11:47 AM
Hello,
I have tried my LCD with an Intuos 2 and it is the same: I have a jittering cursor !
So, what should I dooooooooooooo.... I do not know  Grin
Régis
3  Screen Tablet malarky / Design issues / Re: jittering pointer on: August 26, 2007, 11:42:31 AM
Yes, I use an intuos 1. I have tried many things and I can say that it is the glass LCD that makes bad frequencies. I mean that it is not the inverter, not the screen controler board and not the board of the LCD. It is not the backlights too.
I'm looking for another monitor, and I hope to solve the problem. I do not want to buy a tabletpc !
Do you really think that we should find another wacom ?  Undecided
That will cost too much money...... Undecided
I would love to find an anti-jitter program too ! Grin

Régis
4  Screen Tablet malarky / Build Logs / Re: Regis's build log on: August 22, 2007, 07:38:12 PM
What do you think about this one : Philips 150B TFT LCD - 15"?
or this one : TFT LCD nFren NF-1500MA

It comes with an exernal power supply.  Huh

Thanks!
5  Screen Tablet malarky / Design issues / Re: jittering pointer on: August 22, 2007, 06:16:56 PM
Hi Chimera,


I have the same problem with my build. So I will have to find another LCD....
I think that you can not shield your LCD, because the interferencies come from the LCD panel itself. This is what I think.
So, good luck !

Régis Wink
6  Screen Tablet malarky / Build Logs / Re: Regis's build log on: August 22, 2007, 06:11:12 PM
OK...... so I 'm gonna to jump on this one !  Grin
I have received today the FFCs from DIY Beamer.com, and cut my 50 pin to make a 45 pin !!!!
Waste of time and money, I think.
What is the monitor I should find Huh? The one which can work with my intuos 1  !!!!! of course !!! Undecided

Thanks Drew ! Hope to find another monitor........
7  Screen Tablet malarky / Build Logs / Re: Regis's build log on: August 22, 2007, 01:18:37 PM
I have tried different refresh rates...... you mean it is time for me to look for another monitor ? Embarrassed
8  Screen Tablet malarky / Build Logs / Re: Regis's build log on: August 21, 2007, 05:44:51 PM
I try.... I try.... but I'm still not able to stop jittering  :'(
9  Screen Tablet malarky / Build Logs / Re: Regis's build log on: August 17, 2007, 08:20:44 PM
Yes, both side of my FFCs are detachable ! That is the reason why I do not know if I really need the pcb !
PCB + FFC may cost more than 30€.... I think it is expensive !

Below is a picture showing my two FFCs that came with the monitor:

My question is that I have not solve the jitter problem ! Undecided
10  General Category / Who are you? a.k.a WHY CAN'T I POST? / Re: Big Hello !!!!!! on: August 16, 2007, 04:32:51 PM
Hello again master Drewid !
Who is the master HuhHuh Cool
11  Screen Tablet malarky / Build Logs / Re: Regis's build log on: August 16, 2007, 04:27:41 PM
Hello Drewid,

Yes, of course, I tried running the monitor at different resolutions ! And I already putted all the boards behind the wacom shield. That is why I do not understand ! Undecided
What I would like to know about FFCs extension is if they have double-sided contact surfaces, please ?
Thanks
12  Screen Tablet malarky / Build Logs / Re: Regis's build log on: August 16, 2007, 07:48:50 AM
Hello Switz !

I know you a little because of your posts on the forum and I thank you for interesting you in my case !
Can my problem of crazy cursor comes from the FFC cables which are too short? Why do I need pcb board ?
I already tested many things without result:
-inverter
-neons
-boardt of the LCD
-board of the wacom

Régis Wink
13  General Category / Who are you? a.k.a WHY CAN'T I POST? / Re: Big Hello !!!!!! on: August 15, 2007, 03:15:31 PM
Thank you verry much for your support Bubbaflamm ! Wink
14  Screen Tablet malarky / Build Logs / Re: Regis's build log on: August 15, 2007, 03:13:01 PM
I have tried many things..... but there is still jitter.
15  Screen Tablet malarky / Build Logs / Re: Tanassi's build log on: August 14, 2007, 06:32:16 PM
WOW !!!!!  Shocked
Pages: [1] 2
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!