Bongofish
November 11, 2019, 09:11:40 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: You can attach photos hosted by the forum rather than using an external image hosting site, this means they will stay forever and not disappear after a year or two.
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Going bananas!  (Read 7170 times)
dukens
New Poster
*
Posts: 5


View Profile
« on: April 12, 2011, 02:10:31 PM »

a
« Last Edit: September 26, 2011, 10:02:24 PM by dukens » Logged
dukens
New Poster
*
Posts: 5


View Profile
« Reply #1 on: April 21, 2011, 12:28:30 PM »

b
« Last Edit: September 26, 2011, 10:02:32 PM by dukens » Logged
Kareltje
Jr. Member
**
Posts: 51


View Profile
« Reply #2 on: April 21, 2011, 12:44:41 PM »

Hi,

Great that it worked out for you so well! Also nice to hear that the guide was useful for you.
The minimal jitter is probably easily fixed by changing the refresh rate a bit.
We also noticed that the jitter varies with the different pcs we connect it to.

Kind regards,

Karel 
Logged
bernard
Administrator
Hero Member
*****
Posts: 2590


pato mania


View Profile
« Reply #3 on: April 21, 2011, 07:32:34 PM »

Great stuff!   Cool  Can't wait to see the final build!
Logged
dukens
New Poster
*
Posts: 5


View Profile
« Reply #4 on: May 12, 2011, 11:02:27 AM »

d
« Last Edit: September 26, 2011, 10:02:44 PM by dukens » Logged
Kareltje
Jr. Member
**
Posts: 51


View Profile
« Reply #5 on: May 12, 2011, 11:37:36 AM »

It looks really nice, job well done!
Especially the casing on the back that holds everything nicely.
Logged
bernard
Administrator
Hero Member
*****
Posts: 2590


pato mania


View Profile
« Reply #6 on: May 13, 2011, 05:05:34 AM »

Wow! 

So did you say that most of the jitter had gone away because of the tape?

The little button board + led sticking out in the last image is cool!  Tongue   No joke, did the intention is to integrate it on the "side" of the back cover?

Still have jitter?  Today I stumbled on a utility to play with the frequencies for Macs :  SwitchResX  -- give it a try!

I really like the nylon thing for the cable -- it's nice looking! Good find!


Now I picture a banana wrapped in aluminium foil: Eat this, jitterbug!
Logged
dukens
New Poster
*
Posts: 5


View Profile
« Reply #7 on: May 13, 2011, 08:06:39 AM »

hahah Smiley aluminium banana

Yes, I'd say all of the jitter went away. Just tiny jitter if holding the pen absolutely still, doesn't effect the drawing imo. I created sort of a "box" with the tape. The backcover of the wacom is covered with the tape as well as the inside of the backcover, and I also made sure they connect, and to be perfectly safe, I put a ground wire to both of them.

Yes the board with the button goes to the side of the backcover. And I was using the switchresx already to change the hz. I couldn't see much of a difference when changing the frequencies once I put the aluminium properly.

The tape was pretty cheap, 5meters * 30mm was only 5€ and the glue is really strong in it.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!