Thank you! I'm really proud of my first mod
You're right, this is the perfect place for the connector. This way it can't be pulled out and the Teensy and its USB slot are safe.
Well, the Teensy and the mainboard indeed overlap, maybe 1mm, and there are at least 3mm between them. I first tested the tablet without isolation and noticed no negative changes, so I left it as it is. The functionality is the same as it was before, with the Teensy outside the tablet, with much longer wires and my cat on the tablet
I even had to resolder all wires to fit them in.
And this is one of the nicest reset button I have ever seen!
Haha! I like it too
First I wanted to make a simple hole and press the button with something sharp, but then decided to give my dried out Stabilo pen a second life.