test1
February 20, 2017, 07:13:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: You may have to login twice the first time,  but we don't know why - Erm I mean it's a security thing yeah that's it - security.
 
   Home   Help Search Login Register  
Pages: 1 ... 5 6 [7]
  Print  
Author Topic: Converting Wacom UD-1212-R from Serial to USB  (Read 46776 times)
bernard
Administrator
Hero Member
*****
Posts: 2583


pato mania


View Profile
« Reply #90 on: December 20, 2016, 08:45:02 AM »

UD-1218-R and UD-1212-R are (almost) the same device. Control board is the same (or at least I didn't see a difference) so the conversion guides will work as is. The difference is in the firmware to handle the bigger board and as a consequence the Waxbee configuration.
Logged
momo
New Poster
*
Posts: 2


View Profile
« Reply #91 on: January 17, 2017, 01:55:48 PM »

I just don't know if this thread is still alive, but I recently modified my old UD1212 serial to intuos2 USB emu based on this thread, although I have a trouble to make intuos2 driver recognize the original stylus pen. I am afraid I need an intuos2 compatible pen instead of the original. The tablet and functions are recognized well and status LED responses with the original pen.

OS is windows10, just for your info. At least, there are reports on the web that the intuos2 driver works on windows10, such that I speculate this is not due to driver issue. The driver I am using is 6.2.0w5.

Because of this trouble, I tried intuos5 emulation, but ended up with no recognition of the tablet at all, by the way.

I appreciate your kind help.

Thanks,
momo
Logged
DD
New Poster
*
Posts: 6


View Profile
« Reply #92 on: January 18, 2017, 12:12:01 AM »

The driver not seeing the pen can be a sign that the tablet is not communicating with the Teensy/Waxbee.

The driver could be seemingly functioning even with only the Teensy unit connected to the computer without the tablet. And the pen still can interact with the tablet's LED even though it's not connected to anything.

You don't need a newer pen if the one you've is still good. I would try checking the soldering job.
Logged
momo
New Poster
*
Posts: 2


View Profile
« Reply #93 on: January 18, 2017, 11:17:29 AM »

Hello DD,
I will check my solder again.
Thank you for your clarification and advice.
momo
Logged
Pages: 1 ... 5 6 [7]
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!