Bongofish
December 14, 2019, 05:06:07 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: You can attach photos hosted by the forum rather than using an external image hosting site, this means they will stay forever and not disappear after a year or two.
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Help to identify wacom board to board connector  (Read 3512 times)
Adlorem
Jr. Member
**
Posts: 34


View Profile
« on: December 30, 2011, 07:52:26 PM »

Does anyone know what kind of connector is this? This is board to board connector which connects Intuos3 logic board with controller board. I need to extend this with cable (if possible). Thanx for your help in advance Smiley

Logged
bernard
Administrator
Hero Member
*****
Posts: 2590


pato mania


View Profile
« Reply #1 on: December 31, 2011, 07:28:52 AM »

This appears to be quite high-density. How many connections?  Take a picture of the cable.  You really need to extend this(?)

Logged
Adlorem
Jr. Member
**
Posts: 34


View Profile
« Reply #2 on: December 31, 2011, 07:42:50 AM »

It has no cable it is direct board to board connector Sad . It 60 pin each side.
« Last Edit: December 31, 2011, 07:47:12 AM by Adlorem » Logged
Adlorem
Jr. Member
**
Posts: 34


View Profile
« Reply #3 on: December 31, 2011, 08:28:06 AM »

As I thought Japanese piece of art. Hirose FX8C High-Speed (3.125Gbps) Stacking Connector. There will be no way to extend it in easily.
Logged
bernard
Administrator
Hero Member
*****
Posts: 2590


pato mania


View Profile
« Reply #4 on: December 31, 2011, 06:31:51 PM »

At 3.125Gbps you do not want to extend this. But I suspect this is not the speed it is running at.
Logged
Dragon
Full Member
***
Posts: 121



View Profile WWW
« Reply #5 on: January 05, 2012, 04:48:13 PM »

Why do you want to extend it?  Are you thinking of trying to move the magnetic reflector sheet farther away from the sensor to reduce jitter and the daughter board is in the way?
Logged
Adlorem
Jr. Member
**
Posts: 34


View Profile
« Reply #6 on: January 06, 2012, 09:15:05 AM »

I am building my cintiq on aluminium composite plate. It has to layers of aluminium that could be used for shielding purpose. I wanted to move the whole electronic under this plate, but with this connector it looks now quite difficult. I will experiment with reflector hight to determinate if it has any positive or negative effects on pen reading hight.
Logged
Dragon
Full Member
***
Posts: 121



View Profile WWW
« Reply #7 on: January 06, 2012, 05:53:35 PM »

Cool.

I just created a new tool you can use in the fight against jitter over here.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!