Hi again, i bought another screen, its working, took a photo.
It's thickness is about 6.5mm, 7mm.
But this little plastic pieces make the thickness a little more, it should not be a very big problem i can cut them off. Or in which case i should rip it off. Because there will be nothing left to keep all layers in one piece.
The cable is 20pin 0.5mm
I'm gonna order 20pin 0.5mm pitch cable, and a PBC but i want to be sure more that it would work. Is there any more test should i do before advancing. For ex. there was a test that you should try the screen at top the tablet, if it doesnt work you try it under the tablet. What do i learn from that test? Should i unplug the FFC before i put it on top tablet, etc.