Actually, everything starts with this forum. I tried the recommendations in http://www.tabletmod.com/
. After I finished that design, I was using LP154WX4 type monitor and njytouch controller for it. At first time a lot of jitter happend and I hadvery bad problems with that. So I decided a new design with new idea.
My new idea is "Cutting my wacom". That was crazy bec i love my tablet but at the end i took the risk and made it cutten.(I am gonna send the drawings of cutting place in dxf format.)For those dont try laser cut,jigsaw machine is the best solution.For cutting the upper part,you have to watch how to disassamble the wacom, bec when I was trying it,I broke shortcut buttons FFC connectors and it delay my project 2 weeks.Anyways be careful about dissassamble issue.And also i changed my monitor type to the b154ew01 ebcits easy to strip the metal parts from it.I broke my lp154wx4 when i was trying it.
When i cut out the upper part, it was opened 5mm deep space to fit my lcd on wacom.(I isolated my wacom by paper before i put LCD panel)it was enough space to fit for an lcd panel. Also there are 3 free screw hole opened by orginally on the tablet which helps me to fix it to the enclosure. that was brilliant bec it make stable my wacom with enclosure.I also share the drawings of enclosure for laser cut process.
In the drawings some of the holes for screws are not drawn bec i make this holes when i was setting it. the holes are 3-4mm diameter.
The is also one point you must remember is magentic field of inverter. I conserve my cards from inverters magnetic field by placing an aluminum foil into the "digitalism" poster. i needn't to be digitalism i like their music.You see in the picture, the aluminum foil is between poster paper.
At the end i waste a lot of money to be succeed in that design but actualy you need
2-one 15.4 b154ew01 lcd panel
3-3mm thick translucent plexyglass for enclosure
4-2mm thichk transparent plexyglass for monitor top
5-Chloroform to stick plexyglass stuff
6-3mm dia screws and screw drivers
8-the poster of your favorite band
9-Tape (cello,electric band)
10-Driller for some holes,or dremel(google it)
11-Cables to lengthen your inverter cable
13-papers to isolate your wacom card
drawings of lasercut :http://www.devingen.org/shared/wacom_son.zip