December 16, 2019, 03:38:36 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: You can attach photos hosted by the forum rather than using an external image hosting site, this means they will stay forever and not disappear after a year or two.
   Home   Help Search Login Register  
Pages: [1]
Author Topic: Saving Wacom Digitizer Data using Microcontroller  (Read 1876 times)
New Poster
Posts: 3

View Profile
« on: February 11, 2013, 05:50:58 PM »

First off, thank you all for the amazing resource of information on this forum.

I am looking to build a drawing device that would allow me to capture and save my drawings without the need to be plugged into a computer. I am currently using a SU-13W02E-03A digitizer from ebay and I have built a usb cable adapter that works on my Windows 8 laptop.

I would like to use a microcontroller such as an Arduino or Teensy to capture the data from the digitizer and save it to an SD card. I would then make a program on Windows that would play back this data and could create a vector graphic.

My questions are the following:
- Is this feasible?
- Is an Arduino the correct device to use?
- Should I capture data from Serial or USB?

Thanks for the help!
Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!