test1
April 27, 2017, 07:52:23 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: You can attach photos hosted by the forum rather than using an external image hosting site, this means they will stay forever and not disappear after a year or two.
 
   Home   Help Search Login Register  
Pages: 1 [2]
  Print  
Author Topic: Intuos5+15inch retina panel  (Read 12253 times)
bumhee34
Sr. Member
****
Posts: 145


View Profile WWW
« Reply #15 on: November 02, 2014, 02:59:27 PM »

Hope this is first successful build on 15" retina wacom tablet.

It's completed! Yeah!

Let me start my build log.

Here comes the longer eDP cable.
See? it's longer than original eDP cable.


This is test with new eDP cable.
It works well Smiley


I desoldered every small LED lights on the tablet, since it would be trouble when I attach the display module.
Though they are soooo small, it would be better to remove them.


I cut the rip on the top cover to have enough space for the board on LCD.


I used dremel to coup(?) more.


A hole for the eDP cable.


Shows the usage of the hole.


Screw holes for the display board.


This board is no more available... I am lucky to have this.


Ground points for the board, this will be attached on the metal sheet under the wacom tablet.


Using strong double-sided tape, the display module will be attached on the tablet.


Attach it!


Ground point on the board of the LCD.


Combine the top cover.


And then 0.7mm tempered glass is attached, the glass is already printed on inactive area.
It costs a lot, but it is worthwhile. (around 150$)


Final shot!


More..







The back side, I will make housing for the board later.



Thx bongofish!


http://youtu.be/1dLvyjhkzl0
Logged
bumhee34
Sr. Member
****
Posts: 145


View Profile WWW
« Reply #16 on: November 03, 2014, 07:27:57 AM »

Ooops, there is a mistake.

It is obviously pth 850 not 650 Smiley
Logged
profaldo
Full Member
***
Posts: 106


View Profile
« Reply #17 on: November 03, 2014, 08:29:54 AM »

Can the display controller be powered by USB port on a laptop?
Logged
Aerendraca
Administrator
Hero Member
*****
Posts: 1057


View Profile
« Reply #18 on: November 03, 2014, 08:52:21 AM »

Very nice! I told you you'd be the first to get this finished and so beautifully too. Nice work!

I can happily admit that I'm quite jealous, I haven't been able to get any of my build done for a while now - too many other commitments.

How is it for jitter? Is it lovely working at such high resolution?

@profaldo- no the controller can't be powered by USB as it requires 12v and at least an amp to drive the panel.
« Last Edit: November 03, 2014, 09:03:15 AM by Aerendraca » Logged
bumhee34
Sr. Member
****
Posts: 145


View Profile WWW
« Reply #19 on: November 03, 2014, 10:22:24 AM »

Can the display controller be powered by USB port on a laptop?
As Aerendraca said, nope.
Logged
bumhee34
Sr. Member
****
Posts: 145


View Profile WWW
« Reply #20 on: November 03, 2014, 10:23:54 AM »

Very nice! I told you you'd be the first to get this finished and so beautifully too. Nice work!

I can happily admit that I'm quite jealous, I haven't been able to get any of my build done for a while now - too many other commitments.

How is it for jitter? Is it lovely working at such high resolution?

@profaldo- no the controller can't be powered by USB as it requires 12v and at least an amp to drive the panel.
Thank you very much! I am expecting your resut soon Smiley

And, luckly no jitter at 56 Hz in my case. It works wonderful Smiley 

Thx again!
Logged
profaldo
Full Member
***
Posts: 106


View Profile
« Reply #21 on: November 04, 2014, 09:09:52 AM »

@profaldo- no the controller can't be powered by USB as it requires 12v and at least an amp to drive the panel.

I was looking at this:
http://abusemark.com/store/index.php?main_page=product_info&cPath=3&products_id=47

I think it is made by the same guy, Rozsny. In the description it mentions that the board could be powered by a 5v USB. I thought that bumhee used the same PCB. But I looked at it again, and that is not the case.

Bumhee - Fantastic build. This looks really really awesome!
Logged
thatcomicsguy
Jr. Member
**
Posts: 63


View Profile
« Reply #22 on: November 04, 2014, 10:36:56 AM »

Beautiful.

Congratulations on a fine build!

Can we see a video of this puppy in action?

Cheers!
Logged
bumhee34
Sr. Member
****
Posts: 145


View Profile WWW
« Reply #23 on: November 04, 2014, 12:03:18 PM »

Beautiful.

Congratulations on a fine build!

Can we see a video of this puppy in action?

Cheers!

Oops, I tag the youtube link. That's on blowest part of my build log Smiley

It's a very short video, but you can briefly look at it.
Logged
opivy224
New Poster
*
Posts: 2


View Profile
« Reply #24 on: January 11, 2015, 06:43:34 PM »

Great work! I would kill for one of these.
Logged
DonShole
Sr. Member
****
Posts: 169



View Profile WWW
« Reply #25 on: January 19, 2015, 12:51:59 AM »

Very beautiful indeed!  Well made.
Logged

EZ CINTIQ. How to build a DIY Cintiq, it's  easier than a DIY PC! www.tabletmod.com
Aerendraca
Administrator
Hero Member
*****
Posts: 1057


View Profile
« Reply #26 on: September 16, 2015, 04:20:28 PM »

Quick question regarding this build Bumhee34, do you still use it?

It's been almost a year since you finished it. I was wondering if it still works ok? I'm coming to the end of my MBPR build now and I'm looking at addressing the LED heat issue, but I notice that you didn't seem to tackle this with any specific cooling solution; would you have added cooling if you could start over?
Logged
Pages: 1 [2]
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!